Air Dispersion
Air Dispersion Options
In open ceiling architecture, traditional metal duct systems discharge air through side-mounted metal diffusers. The air is directed to specific zones resulting in less efficient mixing of air in the occupied space and often causes drafting and hot or cold spots.
With a DuctSox system, the air is efficiently discharged along the entire length, providing consistent and uniform air dispersion in the occupied space. Air dispersion options include:
Air Porous Fabric
This option allows air to pass through the fabric with the airflow rate controlled by the fabric weave and the internal static pressure. Air can be delivered exclusively through the porous fabric or can be combined with various venting options to achieve desired airflow. This option is a commonly used alternative to exposed double wall duct.
Features Include:
- No condensation
- Reduced dust on top
- Minimal heat gain/loss
- Optional reduced air throw
Venting Options
-
Linear Vents
- Linear vents are the standard dispersion option for porous fabrics and provides a gentle airflow through precision cut vent patterns
- Typically used in high occupancy spaces where air diffusion and mixing are of high importance
-
Orifices
- Orifices are the standard dispersion option for non-porous fabrics
- Orifice size and orientation based on required air throw distance
-
Grommets
- Grommets are used in porous fabrics when greater throw than linear vents will typically allow, due to air released via porosity
- Grommets are used in porous fabrics when greater throw than linear vents will typically allow, due to air released via porosity
Nozzles
-
Adjustable Nozzles
- These nozzles provide custom adjustability of throw with 360 degree rotation and 10 different angle settings, including a closed setting
-
Fixed Nozzles
- Provides jet-type airflow
- Constant flow or closed off option with aftermarket plugs